Fixed Orifice Valve Remove and Replace

iklan bawah share

Tools

The following tools (Figs 5.62–5.64) are available for removing and installing the fixed orifice tube:

1. Remover and installer for fixed orifice tube (with threaded sleeve) 34–004.
2. Remover for damaged fixed orifice tube (without threaded sleeve) 34–005.

The tool with the number 34–004 is hooked into the housing of the fixed orifice tube.The fixed orifice tube can then be withdrawn from the line by turning the threaded sleeve. This tool is also used to install the fixed orifice tube. This must be slid into the line as far as the shoulder. 

If the housing of the fixed orifice tube breaks off during removal, the damaged fixed orifice tube can be removed with tool 34–005 in conjunction with the threaded sleeve of tool 34–004. For this purpose, the tool is screwed into the fixed orifice tube.

iklan bawah postingan iklan bawah related post